first_imgWhen, if ever, should you consider installing a continuous layer of rigid foam under a concrete slab?The answer to this question depends on at least four factors: (1) your climate zone, (2) the height of the slab with respect to grade, (3) whether the room above the slab is used for living space; and (4) whether the slab has hydronic heat.The most common insulation materials for use under a concrete slab are extruded polystyrene (XPS) and expanded polystyrene (EPS). Of these two materials, green builders prefer EPS, because EPS is manufactured with a more environmentally benign blowing agent than XPS. (For more information on this issue, see “Choosing Rigid Foam.”)If you prefer to avoid the use of rigid foam insulation, you might want to consider installing mineral wool insulation under your slab. For more information on this approach, see “Sub-Slab Mineral Wool.”Insulation requirements for slab-on-grade floors can be found in section R402.2.9 of the 2012 IECC and 2015 IECC, as well as section N1102.2.9 of the 2012 IRC and 2015 IRC. Code requirements for slab insulation are very poorly written; in fact, they are almost unintelligible. Here’s my translation:The “picture frame approach” is illustrated below.For most slabs in Climate Zones 3 through 8, it’s important to install vertical insulation at the slab perimeter — even if you decide to omit horizontal sub-slab insulation. The only exception to this rule is when termite populations preclude this type of insulation. If you are unsure of whether termites are a serious problem in your area, seek local advice.For a basement slab, the vertical insulation at the perimeter of a slab is usually only 4 inches deep. But for a slab on grade with a frostwall foundation, the vertical insulation at the perimeter of the slab will usually range in depth from 2 to 4 feet.In a cold… Sign up for a free trial and get instant access to this article as well as GBA’s complete library of premium articles and construction details. Start Free Trial Already a member? Log incenter_img This article is only available to GBA Prime Memberslast_img